An Interesting Repair

A customer came to me with an antique three legged table, the problem was it used to have four legs. During a recent move one of the legs broke off and was lost. The leg was turned, meaning it was round rather than square, and to make matters worse it also had a series of V-grooved beads along the main portion of the leg.

Measurements - I started by taking measurements of one leg; both diameter and where it occurs on the length. Those measurements were used to create a drawing to work from.

Preparing the Blank- Next I glued up a blank that was 3” square and 24” long for the new leg. The next day I cut the corners off of the blank using a table saw, forming a long octagon. The blank was then mounted in my lathe and I transferred the measurements from my drawing to the blank.

Turning the Leg – Using gouges, skews and other turning tools I created the curve of the leg on my blank. When the turning matched my drawing it was time to sand it smooth. The lathe is set at a high speed and very fine sand paper is used to clean up any tool marks.

Groove & Beads – This detail was on a serpentine section of the leg, and required a special jig and a router to cut. The jig followed the curve of the leg and supported the router at a specific height over the leg. The router bit cut the detail, the leg was rotated 20 degrees, and the process repeated eight times.

Assembly – I trimmed the broken leg on the table and then drilled a hole in the center of it. A matching hole was drilled in the new leg and the two halves were joined with a dowel pin and some glue.

Finish – The table had a natural finish but the new leg was much lighter. I stained it to match the rest of the table, and gave the new leg several coats of varnish to protect it.

Many people would think that without the original leg, the table couldn’t be fixed. Before you make that decision about your broken furniture, check with an expert.

There are two basic styles of doors used in furniture; slab and panel, but there are several variations to choose from in these styles

Slab doors are just that, a slab of wood. They are usually a piece of solid wood, plywood, medium density fiberboard, etc. They can be plain or have some details to them, but they are usually used in lower quality furniture or in European style cabinets.

Panel doors consist of styles (vertical pieces), rails (horizontal pieces) and a panel of some type. A panel can be wood, glass, plastic, metal, cloth or pretty much any material that can be suspended between the styles & rails. Let’s look at some of the more popular panel styles for furniture.

Flat panel doors are the most basic of the family. The panel can be as simple as a piece of ¼” veneer plywood, although these tend to sound flimsy when they close. A better choice is to use a thicker panel. These require relief cuts to fit into the groove, but they do give the door a more substantial feel.

Raised panel doors as the name states, has the field of the panel raised from the edge. When designing your door panels there are several patterns to choose from. You can use a straight, curved or ogee patterns to name a few.

Cathedral Doors are another version of a panel door. While these can be flat panels, they are more often seen raised. The top rail is changed to incorporate a curve, or curves, giving you an additional decorative element.

These are just some basic facts about door designs used in furniture making. There’s no way I could cover everything in one quick article, so feel free to contact me if you’d like more information.